In recent years, the use of gasoline-powered passenger cars has decreased dramatically worldwide, and the use of hybrid and fully electric cars has continued to grow. Since 2010, the use and import of hybrid cars in our country has increased, and it is estimated that four out of ten cars on the road are “hybrid”. Therefore, in this “Auto Salon” column, we present the advantages and disadvantages of Prius cars that are everywhere in Mongolia, tips that drivers of “hybrid” cars need to know, and prices. ACTIVATION OF “PRIUS” WATER PULLING SYSTEM Due to recent heavy rains in most areas, the roads are very slippery and muddy.
Especially since most highways in the capital city do not have drainage pipes, lake-like water forms everywhere after temporary heavy rains. It is important to consider a few things in order to make a hybrid car with that much water. First of all, you need to disconnect the Prius’s electric motor or activate the water flow system. To activate this system, first turn off the vehicle. Then double-click the power button without stepping on anything. At this time, your vehicle will switch to “On mode”. After that, step three times. Then the gear must be shifted to “N”. When “N” or gear is disengaged, step on the lever three times. After that, set the gear back to “P”. After that, you have to step on the door three times.
After doing the above, two warning lights with a picture of the car and a picture of the water heater will light up on your car’s display. This means that the water passage system is activated. At this point, since your car is in “on mode”, step on the brakes, press the start button, and turn it on. Making such adjustments and crossing rivers and water will be able to fully protect your car’s top, bottom, upper and lower computers from burning. REMOVING PRIUS TRACTION CONTROL SYSTEM OR REPAIRING CONTINUED SCRATCHES “DA HUREE” MARKET PRICE OF CAR TRADE The price of the car that buyers are most interested in But you, the driver, are on snowy, sandy, and slippery roads. If you are going to drive on the road or if you accidentally put your car in snow or mud, you should disconnect the traction control system of Prius.
By removing this system, the electric motor will act as an auxiliary engine. In this way, the gasoline engine of the “Prius” will work continuously and continuously drive the front-wheel drive. To disengage the Prius’s traction control system or create a continuous “scratch”, repeat the above activation of the traction control system. However, it should be noted that if you step on the pedal three times to activate the traction control system, you must step on the pedal twice to disengage the traction control system. After doing the above, a picture of a car with a warning sign will appear on your car screen. This means that the “Traction control system” is completely disconnected or the electric motor is disconnected. As a result, it is clear that the car’s driving ability will increase as the front axle begins to “scratch” continuously.
DO NOT ADJUST THE HYBRID VEHICLE’S PAIR TO THE END. Do not set your car’s air conditioner and heater to the coldest or hottest temperature when operating it in hot summer or cold winter. If you set your car’s par above 32 degrees until the end, the load on the computer will increase and the gasoline engine will start running constantly. This increases fuel consumption and shortens the life of the engine. Therefore, it is better to set the temperature of your car to 23 degrees Celsius, and set the blower to “M”. In this way, you should take care that your car engine will work normally, gas consumption and computer load will be normal.